LEMKEN Ecospray Sirius 10 Operating Instructions Manual Download Page 69

Page: 69 / 152

SEH Boom

12.7.5 Folding the boom automatically (Premium only)



Hold this key until the boom is complete-

ly folded out.



Hold this key until the boom is complete-

ly folded in.

The LED flashes during the folding pro-
cess.

12.7.6 Slope compensator



Press this key to select the slope com-

pensation function.

The function is active as soon as the LED
illuminates.

To set the slope compensation downwards
on the left and upwards on the right:



press the left joystick outwards



press the right joystick inwards.

To set the slope compensation downwards
on the right and upwards on the left:



press the left joystick inwards



press the right joystick outwards

Summary of Contents for Ecospray Sirius 10

























































































































































Search results

Summary of Contents for Ecospray Sirius 10

Reviews:

Related manuals for Ecospray Sirius 10

Brands by name

Popular brands

LEMKEN Ecospray Sirius 10, Operating Instructions Manual

Search results

Summary of Contents for Ecospray Sirius 10

Reviews:

Related manuals for Ecospray Sirius 10

Brands by name

Popular brands