background image

 

 

Spare parts ordering

 

 

This device is supplied with a specification listing all assemblies that are relevant 
for the product. The spare parts list valid for your device includes both those as-
semblies relevant to you and those that are not intended for your device. Make 
sure that you only order spare parts that belong to the assemblies that can be 
found on your specification or the enclosed print out. When ordering spare parts, 
state the type designation and serial number of the device. This information can 
be found on the rating plate. Enter this data in the fields below so that it is always 
to hand. 

 

Type designation: 

 

Serial number: 

 

 

Remember that you should only use genuine LEMKEN spare parts. Reproduction 
parts have a negative influence on the function of the device, have a shorter ser-
vice life and present risks and hazards that cannot be estimated by LEMKEN 
GmbH & Co. KG. They also increase the maintenance costs. 

 

Service and spare parts 

 

Information on service and spare parts is available from your local dealer or our 
website at www.lemken.com.  

 

Summary of Contents for Ecospray Sirius 10

























































































































































Reviews: