Operation
105
16.2.3.3
Calibration using the measuring cup method
Fill the tank of the implement with water
to the nominal fill level.
Drive with the implement onto a level,
unsurfaced area, where the water can
easily soak away.
Allow the pump to run at the specified
nominal speed. Refer to the operating
instructions for the implement.
Carry out spraying until water emerges
from all nozzles.
Press this key from the settings menu to
access the menu for calibration using
the measuring cup method.
Place a measuring cup under a nozzle
such that all the output is collected.
Does the 'Pump switched on' display ap-
pear?
If not,
switch on the PTO.
Press this key to confirm the process.
The display for the start of calibration ap-
pears.
Press this key to start calibration.
Carry out calibration until the measuring
cup is sufficiently full.
Press this key to finish calibration.
