Preparations on the tractor
17
The following cables can be connected to the signal socket:
Speed sensor set
Radar or universal joint adapter cable
5.3 Socket
A 3-pin socket according to DIN 9680 must
be available on the tractor for the power
supply.
If necessary, the optional battery connec-
tion cable can be connected directly to the
battery of the tractor.
5.4
Operating voltage and fuses
An operating voltage of 12 volts, with a tolerance range of between 10 and 15
volts is provided for the electronic control unit.
Voltage levels which are too low or too high will lead to malfunctions and may de-
stroy the electronic equipment. In addition, the power supply must be provided
with at least a 25 A fuse.
The electronic control unit has an operating terminal and a job computer. The op-
erating terminal must be installed in the cab of the tractor within reach and in view
of the driver. The job computer is located on the implement.
The operating terminal must be disconnected from the power supply:
after work with the implement is finished,
before the implement is parked for an extended period.
