Commissioning
30
11.2
100 m calibration
A calibration over 100 m must be performed after the operating terminal is con-
nected.
If possible, the 100 m calibration must be performed
on the area which is to be sprayed
with the four-wheel drive [if fitted] switched on
with the tank half full
with the specified air pressure in the tractor tyres
Press this key to switch on the operating
terminal.
The first basic menu is displayed.
Press this key to access the settings
menu.
The first settings menu is displayed.
Press this key to access the calibration
menu.
The calibration menu is displayed.
Press this key to access the 100 m cali-
bration menu.
The current pulse number is displayed.
Press this key to access the starting dis-
play for the 100 m calibration.
The 100 m calibration start display ap-
pears.
Press this key to start the 100 m calibra-
tion.
