Pag. 35
17
– ADVICES – TIPS – IMAGES
WARNING:
The machine must be fed with water having a hardness higher than 8 ° F. It is not
possible the use of tubes and gaskets that have been already used.
•
It is advisable to install a water softener (
1
) for the
water connection of the machine.
•
N.B.
Before connecting the water softener to the
machine, perform a wash cycle and wait until the
water is clear. Only after this you can connect the
water softener to the machine.
•
As far as regards the pressure of the mains, if it is
above 0.5 Mpa (5 bar), it is recommended to install a
balanced pressure reducing valve for high pressure (a
device in which any increase in the mains pressure
does not affect the output pressure).
•
The water draining tube (2) must not bend to avoid
water returns to the machine.
•
To remove the side appliance body, just loosen (do
not unscrew totally) the screw (
3
). This way the side
can move. To replace it, pay attention to first place the
below part of the side and then screw it as it was
originally (
3
).
3
Summary of Contents for Giulietta PL1SVH
Page 87: ...Pag 87 ...
