
Pag. 28
13/1
–COFFEE DOSE PROGRAMMING
Control panels
GROUP 1
GROUP 2
Before programming the coffee dispensing switches fill the filter holder with the correct serving of ground
coffee. Don’t use coffee grouts for programming servings. It’s possible to modify and memorize the servings
(thorugh volumetric control) following the procedure described below:
1.
To enter the programming mode: press one of the 2
switches
K5
of any of the 2 groups and keep it pressed
for more than
3
seconds. Verify that the leds of
K5
on
all groups blink.
2. Within
5 seconds
(after 5 seconds you are out of the
programming mode) press any of the switches for the
different servings (for example switch
K1GRx
). The
relative led of
K1GRx
of the serving you are programming
and the led of
K5GRx
will stay on.
3. Once the desidered quantity of coffee for that serving is reached, press the selected switch again and the serving will
be memorized. The machine will go back to its stand-by mode.
4. Contemporarely the LED of the programmed serving will go off and the LED of the all the K5 switches will blink; now
it’s possible to programm the other switsches to have other servings without repeating the operation described in
point 1.
5. To programm the other switches (if 5 seconds have not elapsed yet) repeat points 2 and 3 consequently.
If 5 seconds have already elapsed and you are out of the programming mode, you need to repeat all the operations of
point 1-2-3 to enter in the programming mode again.
To exit the programming mode without modifying any of the parameters just wait for 5 seconds, without pressing any
switch.
IMPORTANT
: what has been programmed on the FIRST GROUP is ALWAYS automatically transferred also to
the other groups. This does not mean that you cannot programm the other groups independently from group 1,
you can do so repeating the operations in points 1-2-3 also on the other groups.
Switch
K1GR1
Switch
K5GR1
Switch
K2GR1
Switch
K3GR1
Switch
K4GR1
1
espresso
1
coffee
espressos
2
espresso
2
coffees
Continuous
/stop
stop
Switch
K1GR2
Switch
K5GR2
Switch
K2GR2
Switch
K3GR2
Switch
K4GR2
1
espresso
1
coffee
2
espresso
2
coffees
Continuous
/stop
Summary of Contents for Giulietta PL1SVH
Page 87: ...Pag 87 ...