Lelit Giulietta PL1SVH, Instruction Manual, Page: 30 / 88

Pag. 30
13/3
– WASHING CYCLE
The washing cycle enables the cleaning of the groups and can be done acting as follows:
Press the continuous/stop switch (K5GRx) and then the
switch (K1GRx) of the group where you want to do the
washing cycle. The washing cycle will be confirmed by the
synchronic blinking of the relative leds of the 2 switches that
you have pressed one after the other (K5GRx + K1GRx); the
blinking will continue during the entire washing cycle and will
stop if any of the other switches of the same panel will be
pressed. In this case the washing cycle will be interrupted
and the LEDs will go back to the ON position. During the
washing cycle, all the LEDs of the panel (apart from the leds
of the 2 switches you have pressed) are in the OFF position.
It’s possible to undergo a washing cycle using an
appropriate detergent powder (see paragraph 15).
In this way the group that undergoes the washing cycle will dispense water for 5 times through the group. Once the cycle
is over, the panel will go back to the normal functioning mode.
It’s possible to do the washing cycle contemporarily on more groups, as many times as desired during the day.
In paragraph 15-
CLEANING AND MAINTENANCE you’ll see in details how to do the washing cycle with the
recommended detergent powder.
13/4
– CONFIGURATING THE PANEL LEDS TO BE ON OR OFF
The machine enables the configuration of the way the leds work on all the panels. You can choose between: leds ON
(when you press one of the switches for a determined serving, the led of the chosen switch/serving goes on and all the
other leds go off) or leds OFF (when you press one of the switches for a determined serving, the led of the chosen
switch/serving goes on).
To have the LEDS ON, act as follows:
Starting with the machine off, turn the machine on keeping
the switches
K1GR1 and K5GR1 contemporarely pressed.
The correct configuration is given by the going on of the leds
of the pressed switches. Turn the machine off and then on
again for the normal functioning of the machine.
To have the LEDS OFF, act as follows:
Starting with the machine off, turn the machine on keeping
the switches
K2GR1 and K5GR1 contemporarely pressed.
The correct configuration is given by the going on of the leds
of the pressed switches. Turn the machine off and then on
again for the normal functioning of the machine.
Group 1 panel
Machine on
Group 1 panel
Machine on
START GROUP WASHING