FlexLine, 246
Check & Adjust
• To the right: and the bubble goes away from the screw.
4. Repeat step 3. on the instrument and tribrach until both circular levels are
centered and no further adjustments are necessary.
After the adjustment, no adjustment screw should be loose.
11.6
Inspecting the Laser Plummet of the Instrument
The laser plummet is integrated into the vertical axis of the instrument. Under normal
conditions of use, the laser plummet does not need adjusting. If an adjustment is
necessary due to external influences, the instrument has to be returned to a Leica
service department.
Inspect the laser
plummet
step-by-step
TSOX_068
3
4
5
360°
3 mm / 1.5 m
Ø 2.5 mm / 1.5 m
2
1