FlexLine, 158
Applications
LAY-OUT
The graphics are scaled to give a better overview. Therefore it is possible that the
stake out point moves in the graphic.
Next step
•
Either, press
AsBUILT
to check point locations relative to a contruction line.
•
Or, press
ShiftLN
to enter offset values for shifting the construction line.
AsBUILT
To switch to AsBuilt mode to check
points relative to the construction
line.
ShiftLN
To enter values for shifting the line.
Field
Description
Δ
Li
Longitudinal offset: Positive if target point is further away than the
measured point.
Δ
Of
Perpendicular offset: Positive if target point is to the right of the
measured point.
Δ
Height offset: Positive if target point is higher than the measured point.
