Coding
FlexLine, 89
7
Coding
7.1
Standard Coding
Description
Codes contain information about recorded points. With the help of coding, points can
be assigned to a particular group simplifying later processing.
Codes are stored in codelists, with each codelist supporting a maximum of 200 codes.
GSI coding
Codes are always stored as free codes (WI41-49), that means that codes are not
directly linked to a point. They are stored before or after the measurement
depending on the setting made. Point codes (WI71-79) are not available.
A code is always recorded for each measurement as long as the code is displayed in
the
Code:
field. For a code not to be recorded, the
Code:
field must be cleared. This
can be set to occur automatically. Refer to "4.1 General Settings".
Access
•
Either, select
Q-Survey
from the
MAIN MENU
and press
CODE
.
•
Or, press
FNC
when within any application and select
Free Coding.
