Applications
FlexLine, 157
9.10.2
Layout
Description
Search or enter points for staking out relative to the defined construction line. The
on-screen graphics show the position of the prism relative to the stake out point.
Below the graphic, the exact values are displayed, combined with arrows to show the
direction for staking out the point.
•
Be aware that the line start point and the line end point are measured in the
previous coordinate system. When staking out these points they appear in the
old system and appear as shifted.
•
During use of the application the previous orientation and station parameters will
be replaced by the new calculated ones. The line start point will be set to E=0,
N=0.
•
The height of the line start point is always used as the reference height!
Access
•
Either, select
New construction line
from the Construction pre-settings screen
and measure start and end points of the line.
•
Or, select
Continue previous site
from the Construction pre-settings screen.
