Setting
FlexLine, 55
Not Allowed
Does not allow multiple points with the same point
ID.
Auto-Off
Enable
The instrument switches off after 20 minutes
without any activity , for example no key pressed or
vertical and horizontal angle deviation is
±3".
Disable
Automatic switch-off is deactivated.
Battery discharges quicker.
V After DIST
Sets if the vertical angle value recorded is the value that is displayed
when
DIST
or when
REC
is pressed. The vertical angle field in a
measurement screen always shows the running angle, regardless of
this setting.
Hold
The vertical angle value that is recorded is the value
that was in the vertical angle field at the time
DIST
was pressed.
Running
The vertical angle value that is recorded is the value
in the vertical angle field at the time
REC
is pressed.
This setting is not applicable for the application Tie
Distance or the functions Hidden Point and Height
Transfer. For these, the vertical angle is always
running and the value recorded is the value when
REC
is pressed.
Field
Description
