20
Alternate Acquisition Modes – Sequential
Click on the right-most icon in the Acquisition Mode menu.
The Sequential Mode menu appears at the end of the acquisition
parameters window. Click ‘+’ to add sequential events, ‘-’ to remove
them. Up to six sequential acquisition events are possible. Events may
be any of the available modes, e.g., xy, xyz, xyt, xyλ. Events may be
acquired line-by-line (indicated by arrow). This is the preferred
method, because it involves less switching of the scan components.
However, if the detector bandwidth or the average or accumulation
number changes between events, use “Between Frames”. If one or more event is a stack, use “Between
Stacks”.
