20
Return:
1 byte
0 No key pressed
1 Resolution 1 selected (fine)
2 Resolution 8 selected (coarse)
3 Move to next stored position
4 Current position saved
5 Position cleared
Comment:
If one of the two keys is pressed its state can be retrieved. The information is saved until it has
been retrieved.
The message is continuous if "set enable report key action" has been set.
9.11 SAVE POSITION 1
Saves a position in memory 1 of the manual control unit
Command code:
71 040
Parameter:
up to 10 bytes (long 32 bit)
Return:
none
9.12 SAVE POSITION 2
Saves a position in memory 2 of the manual control unit
Command code:
71 041
Parameter:
1 position (long 32 bit)
Return:
none
9.13 SAVE POSITION 3
Saves a position in memory 3 of the manual control unit
Command code:
71 042
Parameter:
up to 10 bytes (long 32 bit)
Return:
none
