8
Assembly
Incident- or transmitted-light stand
Column with motor-focus mechanism
➜
base of stand
왘
Using three Allen screws, secure the column to the
incident- or transmitted-light base (refer to user manual
for stereomicroscope or macroscope).
왘
Using the clamping screw, secure the lower stop to the
column, taking the position of the object into account
(see page 9).
Large swinging-arm stand
왘
Fit the inclinable carrier rod to the horizontal arm in
accordance with the user manual for the stereomicroscope
or macroscope.
왘
Using the clamping screw, secure the lower stop to the
carrier rod (see page 9).
Microscope carrier
➜
column with motor-focus mechanism
왘
Using an Allen screw, secure the microscope
carrier to the column of the stand (refer to user manual for
stereomicroscope or macroscope).
왘
Fit the optics carrier, binocular tube and accessories
to the stereomicroscope or macroscope in accordance
with the user manual.
Transformer
Respect the directions for safety on pages 4 and 5.
Technical data
Type MST31
Input voltage
85 to 264 VAC
Input frequency
47 to 440 Hz
Input current
max. 0.80 A at 115 VAC
max. 0.50 A at 230 VAC
Operating voltage
30V
Operating temperature
+10°C to +40°C
Storage temperature
–20°C to +55°C
Maximum mechanical loading 12 kg
1
Connector for transformer
2
Connector for footswitch or for PC interface kit
3
Connector for manual control
왘
Connect the transformer to the motor-focus mechanism.
왘
Connect the power cable to the electricity supply.
왘
Connect the manual control and/or footswitch.
왘
If appropriate, connect the PC interface kit instead
of the footswitch.
Connecting the motor focus
1
2
3
