7 Measurement
7.1 Selection of Measurement Mode
To select a measurement mode, choose
Settings
Measurement…
or use the Measurement
toolbox:
In
Surface
mode, object surfaces can be digitized. This mode is activated after the
program start by default
In
3D Point
mode, single points will be measured with the T-Probe (Probe)
In
Static Polyline
mode, lines will be measured with the T-Probe (Probe) where each point
of the line has to be measured explicitly
In
Dynamic Polyline
mode, lines are measured with the T-Probe (Probe) where the points
of the line will be measured automatically according to the chosen settings
7.2 Measurement Settings
The settings can be adjusted separately for almost every measurement mode. To do this,
choose
Settings
Measurement…
. A dialog appears where you can select the tab for the
measurement mode you want to adjust. You can also open the dialog from the measurement
toolbox by clicking the
Measurement parameter settings
icon.