C0 (discontinuous):
Neither the tangent nor the curvature of the created
NURBS curve will be continuous
C1 (tangent continuous):
The tangent of the created NURBS curve will be
continuous
C2 (curvature continuous):
The curvature of the created NURBS curve will
be continuous
Note
Depending on the data and the settings you choose it might happen that the
NURBS curve cannot be calculated. In this case, adjust the parameters and
recalculate the curve.
New group
Adds a new subgroup to the selected group
Object(s)
Opens the submenu for other object settings
Alternate
colors per
group
Assigns a different color to each group
Alternate
colors per
object
Assigns a different color to each object
Default color
Assigns the default color to each object
Shiny material
Assigns a shiny color and material to each object
Environment
Mapping
Opens a dialog where you can select an image that is projected onto the
objects and helps to identify faults in the surface. For best results select
Smooth shading
in the 3D viewer settings.
Properties
Displays the characteristics of the object
Object(s) s
ubmenu:
