1 Introduction
1.1 Purchase
Congratulations on the purchase of the Leica Geosystems T-Scan Collect software.
This manual contains instruction for setting up the product and operating it. Read carefully through
the User Manual before you use the product.
These are original instructions and part of the software. Keep for future reference and pass on to
subsequent holders/users of the hardware or software. This User Manual contains information
protected by copyright and subject to change without notice. No part of this User Manual may be
reproduced in any form without prior and written consent from Leica Geosystems AG.
Leica Geosystems shall not be responsible for technical or editorial errors or omissions.
© Leica Geosystems AG
1.2 Trademarks
Product Names are trademarks or registered trademarks of their respective owners.
1.3 Validity of this Manual
This manual applies to the Leica Geosystems T-Scan Collect software.
1.4 Feedback
Your feedback is important as we strive to improve the quality of our documentation. We request
you to make specific comments as to where you envisage scope for improvement. Please use the
following E-mail address to send your suggestions:
1.5 Contact
Leica Geosystems AG
Metrology Division
Moenchmattweg 5
5035 Unterentfelden
Switzerland
Phone +41-62-737 67 67
Fax +41-62-723 07 34
www.leica-geosystems.com/metrology
