Leica Geosystems ScanStation C10 User Manual Download

Page: 89 / 152

ScanStation C10/C5, Care and Transport

5.4

Cleaning and Drying

Windows and
targets

•

Blow dust off scanner windows.

•

Never touch the glass with your fingers.

•

Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth
with water or pure alcohol.

•

Do not use other liquids; these may attack the polymer components.

•

Charger and touchscreen: Use only a clean, soft, lint-free cloth for cleaning.

Damp products

Dry the product, the transport container, the foam inserts and the accessories at a
temperature not greater than 40°C / 104°F and clean them. Do not repack until
everything is completely dry.

Cables and plugs

Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting
cables.

Summary of Contents for ScanStation C10

























































































































































Search results

Summary of Contents for ScanStation C10

Reviews:

Related manuals for ScanStation C10

Brands by name

Popular brands

Leica Geosystems ScanStation C10, User Manual

Search results

Summary of Contents for ScanStation C10

Reviews:

Related manuals for ScanStation C10

Brands by name

Popular brands