manualshive.com logo in svg

Leica Geosystems ScanStation C10, User Manual

Share
Download
Leica Geosystems ScanStation C10 User Manual Download Page 145

ScanStation C10/C5, International Limited Warranty, Software License Agreement

145

Such agreement is provided together with all products and can also be referred to 
and downloaded at the Leica Geosystems home page at 
http://www.leica-geosystems.com/swlicense or collected from your Leica Geosystems 
distributor.

You must not install or use the software unless you have read and accepted the 
terms and conditions of the Leica Geosystems Software License Agreement. Installa-
tion or use of the software or any part thereof, is deemed to be an acceptance of all 
the terms and conditions of such License Agreement. If you do not agree to all or 
some of the terms of such License Agreement, you may not download, install or use 
the software and you must return the unused software together with its accompa-
nying documentation and the purchase receipt to the dealer from whom you 
purchased the product within ten (10) days of purchase to obtain a full refund of the 
purchase price.

Summary of Contents for ScanStation C10

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands