manualshive.com logo in svg

Leica Geosystems ScanStation C10, User Manual

Share
Download
Leica Geosystems ScanStation C10 User Manual Download Page 3

ScanStation C10/C5, Introduction

3

Symbols

The symbols used in this manual have the following meanings:

Trademarks

•

Windows is a registered trademark of Microsoft Corporation

All other trademarks are the property of their respective owners.

Validity of this 
manual

This manual applies to the ScanStation C10 and C5 instruments. Differences for the 
C5 model are marked and described.

Type

Description

Danger

Indicates an imminently hazardous situation which, if not 
avoided, will result in death or serious injury.

Warning

Indicates a potentially hazardous situation or an unintended 
use which, if not avoided, could result in death or serious 
injury.

Caution

Indicates a potentially hazardous situation or an unintended 
use which, if not avoided, may result in minor or moderate 
injury and/or appreciable material, financial and environmental 
damage.

Important paragraphs which must be adhered to in practice as 
they enable the product to be used in a technically correct and 
efficient manner.

Summary of Contents for ScanStation C10

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands