Page 34 of 61
7 Appendix
Information
Regarding the graphic user interface there is no differences between the JET3up and the
printers of the JET Rapid series. The differences appear in the available type of inks and
print modes. The main difference regarding the service work are the adjustments of the print
head and the ink jet. The following chapters are extracts from the manual that comes
together with each printer. Please see the manual for more detailed information.
7.1 Hydraulic settings and printout parameters
7.1.1 Ink selection
Ink selection (JET Rapid , JET Rapid Wire):
The availability of inks depends on the type of JET Rapid. There are specific ink types tested and
approved for the JET Rapid printer series and for these inks, the operator will find default settings in
the hydraulic menu. For
inks that are not approved t
here are no default settings available.
Attention
•
Using an ink that is not approved for high speed printing may result in printouts of
dissatisfying quality!
•
Additionally, an ink that is not approved may cause serious issues through ink
contaminations of the print head!
The following tables show the inks available (December 2017)
INK
JET Rapid Wire
Stepped head cover
JET Rapid Wire
Beveled head cover
50
μ
m
50
μ
m
70-106
*)
70-126
70-134
72-102
76-101
INK
JET Rapid Wire PI
Stepped head cover
JET Rapid Wire PI
Beveled head cover
60
μ
m
60
μ
m
70-120
*)
*)
74-111
76-121
79-106
79-119
79-122
INK
JET Rapid
Option SPEED PLUS
55
μ
m
50
μ
m
70-030
70-031
70-101
70-106
70-126
70-134
72-102
76-101