Appendix
Page 53 of 61
11. The drop production body has to be properly positioned. For this, there are notches on the drop
production body and the nozzle retainer on which the drop production body has to be mounted.
The notch on the drop production unit has to be positioned in
alignment with the notch on the nozzle retainer.
•
When the position is correct, tighten
screw 1
with a
torque of
0,4 Nm
.
•
Then hand-tighten screw
2
.
12. Screw the grounding cable back to the ground plate. Plug in the coax cable.
Tighten the grounding cable back on the ground plate.
Plug in the coax cable.
13. Finally adjust the ink jet: see chapter
