Appendix
Page 45 of 61
* The distance of
0,1mm
must also be checked and/or adjusted after:
•
- Exchange or removal of nozzle / sealing ring
•
- Exchange of removal retaining plate
Use a feeler gauge with a
0,1 mm
blade.
Bring the print head in
adjustment
position
and switch
OFF
the ink jet.
Insert the 0,1 mm blade between the
drop production unit and the charging
electrode.
Attention
Take care that the nozzle is
not covered by the blade, so
that the ink stream is not
affected.
Optimal adjustment:
It should be easily possible to insert the
blade of the feeling gauge without
clearance. The swivel mechanic should
work without touching the block of the
charging electrode.
3. During the
adjustment of the swivel mechanic, the ink jet has to be constantly checked.
