Laundrylux CROSSOVER 2.0 Series, Training Manual

Page: 70 / 74

Stacking a bottom control dryer (DLHS) on the
Crossover 2.0
washer (WHLFP)
Additional Item Needed: Washer Top Panel for Dryer Mounting (Part Number:
Attaching the brackets to the Washer Top Panel
The washer top panel for dryer mounting ( 0020809423F) does not come with the stacking brackets
attached. The panel has a total of 12 tapped holes, 3 in every corner for attaching the stacking brackets.
1. Remove the stacking brackets from the top panel of the bottom control dryer (DLHS).
2. Mount the stacking brackets on the new washer top panel (Part Number:
0020809423F).
3. Then remove the already installed top panel from the washer and replace it with the Top Panel
( 0020809423F) with the attached brackets.
After assembling the Top Panel (0020809423F) on the Washer (WHLFP)
4. After placing the washer in the intended installation position, level the washer as per installation
manual.
5. Flatten a machine carton, and tilt the bottom-control dryer on one of its sides on the carton