![background image](http://html2.mh-extra.com/html/laundrylux/crossover-2-0-series/crossover-2-0-series_training-manual_3850648010.webp)
Display Panel
Fig. 2.5 Display Board
The control panel consists of program selection buttons
(A)
, option buttons
(B)
, a start button
(C)
, and a display
(D)
Depending on the mode these have different functions.
Operating Mode
Service Mode
A
Program selection buttons
Change register parameter
B
Wash program option buttons
Register navigation
C
Wash program start
Save register parameter changes
D
Display indicating price of programs,
program time remaining, and cycle
completion.
Register parameter values,
machine component status, and
error code display
OPERATING MODE:
The display control panel displays the vend price and allows the
selection of the main wash programs. As desired, options can be selected to modify the wash
programs to adjust for load type and soiling. After program start, the time remaining is
displayed until the cycle complete at which point “done” is displayed.
SERVICE MODE:
In service mode the display control panel: enables service mode access
via PIN; reading statistics and error coded registers; machine serial/coin mode change;
setting prices and program parameters; machine component activation; and Real Time Clock
promotion events setup. The control board (A1) retains all register value information. In the
event of faults, error codes will be displayed. See the “Error Codes” section of this manual.
Summary of Contents for CROSSOVER 2.0 Series
