Laundrylux CROSSOVER 2.0 Series, Training Manual

Page: 52 / 74

Other required Parts, Tools and Supplies
Additional required parts
096725 KIT,BEARING REPLACEMENT-XOVER WASHER W/SHAFT SPIDER
Required tools not supplied with the tool kit
Torque wrench
Sledge or heavy duty mallet
T15 tamper-proof security Torx bit (to remove the top cover)
Pinch bar or crowbar
Flexible 1/4 inch socket driver with an 8mm socket (Required to demount coin meter housing
Crossover 1)
General hand tools and metric socket set including 7mm, 8mm, 13mm, and 15mm
Bearing puller or heavy duty chisel.
Required supplies -
"Blue" medium strength (removable) thread locking compound. (Loctite 242 or equivalent)
Cable ties
RTV Adhesive
Disposable gloves (for applying Amblygon grease)