Laundrylux CROSSOVER 2.0 Series, Training Manual

Page: 28 / 74

Coin (Pulse) or Serial Mode Configuration
The washer can accept payment using coins or tokens in COIN MODE or using payment
cards in CARD MODE (serial). Setting the machine to COIN MODE and setting all wash
program and option prices to “0.00” will allow the machine to operate for free in OPL mode.
1. In Metered machines unlock and remove the coin box. Press and release the Service
Switch located in the rear (Crossover 2) of the coin vault to enter service mode.
2. The display will go blank.
3. Press the “HEAVY SOIL” and “EXTRA RINSE” buttons simultaneously. This display
shows “0” (Crossover 2) or “0 00” (Crossover 1) if the machine is in COIN MODE or
“”1” or 1 00” f the machine is in CARD MODE.
4. Press the START button. The display flashes.
5. Press the COLD program button to change the operating mode. The left-most digit
changes 0 → 1 or 1 → 0, indicating the new mode (0 = COIN=default, 1 = CARD).
6. Press the START button. The display stops flashing.
7. Press the service mode button to exit the service mode.
8. Disconnect and reconnect power.