![background image](http://html2.mh-extra.com/html/laundrylux/crossover-2-0-series/crossover-2-0-series_training-manual_3850648059.webp)
Figure 8. Shaft end should be flush with pulley-wheel bolt mounting surface.
If the bearings were not properly, the shaft assembly may not fit into place easily by gravity alone. In this
case, position the supplied pipe, (Item #6), over the inner raceway See figure 9. Cover with Washer (item
#3) and
gently
tap the shaft assembly into place.
Figure 9. Pulley side bearing and shaft. Pipe (Item #6)
Showing correct positioning over the bearing’s inner raceway only.
Summary of Contents for CROSSOVER 2.0 Series
