Laski FZ 500 H, Operating Instructions Manual

Page: 13 / 37

1 3
- Some parts of the machine can be extremely hot while in operation. To avoid any burn
risks do not touch these parts when the engine is still running or when having just
stopped the engine.
-
Do not touch live wires while the machine is still in use.
-
Do not let the engine running in high speed unreasonably.
-
Do not change the engine adjustment, especially its regulator.
- Be careful at battery handling.
- Warning! The battery contains sulphuric acid that could cause burns.
- Do not use the machine under conditions of low visibility.
-
Do not use the machine without prior reading this manual. If you have no experiences
with such type of machines and if you are not sure with its operation, ask your dealer and
he will show you its practical use.
- Do not carry out any repairs that are specified for authorised services only.
-
Do not carry out any repair where its solution exceeds your experiences.
Work Safety Symbols
This article introduces work safety symbols (pictographs) used on the machine. Under a figure
there is its position on the machine. These work safety symbols warn the operator against
risks connected with the machine use. Your respect to the symbol meaning is a precondition
for your work safety.
The user is obliged to keep all the work safety symbols legible, clear and undamaged. In case
of any damage or illegibility ask your local dealer or an authorised service for a new relevant
pictograph.
1 2 3 4