Laski FZ 500 H, Operating Instructions Manual

Page: 17 / 37

1 7
Product Handling upon Delivery
Upon delivery unload the machine from the transport pallet as follows:
- Put the pallet aside on a flat and firm surface.
- Remove transport protective wrapping.
-
Cut the binding band carefully or loosen the fixing bolts. Be careful, the band is tightened
up and after cutting its both ends may shot out. While cutting use protective gloves.
- Lift up the cutter with lifting means. If a building machine is ready attach the cutter and
lock the joints. Before installation check its clamping head tightening.
-
Lift up the cutter in order to remove the transport pallet.
-
Leave the cutter being fixed in the supporting frame.
Precautions
This machine is provided with safety guards protecting against any contact with rotating parts
(hit and pull-in hazard) and against hot parts (exhaust manifold). The guards are fixed, bolted
down and solid, only the guard over the exhaust manifold is perforated.
This machine can be operated by means of a remote control box only, i.e. START/STOP and
EMERGENCY STOP controls.