Laski FZ 500 H, Operating Instructions Manual

Page: 33 / 37

3 3
Cleaning of engine
Clean the engine according to its actual impurity grade by means of the pressure air. Clean
the engine also after every change of oil or air filter element. At the same time check up the
bolts fixing the engine to the chassis.
CAUTION ! Any repairs of the engine should by done by an authorised Kohler service only.
Electric installation
Protect all wires against contact with oil products. Keep all elements clean and avoid any
damage of wires - short circuit risk. All connections must have clean and proper contact
surfaces to avoid intermediate resistance at a wrong contact point.
Check the electrolyte level and density in individual cells of the battery. Before charging keep
all instructions of the battery manufacturer.
Blades Change
When changing the blades proceed as follows:
- Loosen the bolts (10)
- Remove the used blades and fit new ones
- Tighten up the bolts
-
Use torque wrench - torque value of 105 Nm
-
Use always original spare parts and LASKI bolts (10) only
- At this change proceed carefully and avoid any accident
- Secure the machine against possible rollover
Lubrication point -
covered
Lubrication point -
outside