LaserStar iWeld 900 Series, Operation & Maintenance Manual

Page: 6 / 172

LaserStar
®
Workstation Operation & Maintenance Manual 900 Series Ver. 991.6 November 2019
6
What To Do If You Receive A BURN 35
Labeling: Safety and Informational Labels 36
III. Installation
44
Requirements 44
Ambient Conditions 44
Height and Humidity 45
Unpacking 45
Instructions for lifting and carrying Benchtop 45
Initial Power Connections and Distilled Water Filling 45
Power Conditions 46
Brackets for iWeld Benchtop & Professional Series Installation 46
Remote Interlock Connection 46
External Exhaust System (Optional) 47
Inert Gas 48
Distilled Water 48
Electromagnetic Compatibility 48
Disassembling 48
IV. Operation
50
Switching ON 50
Adjusting Stereo Microscope 52
Cross-hair Adjustment 53
Setting Operation Parameters 55
Storing Operating Parameters 62
Recalling Stored Parameters 65
Welding 65
Resetting Pulse Count 67
Text Entry Mode 67
Switching OFF 67
Status Indications 68
Pulse Suppression 69
EZ-LINK
TM
(Hardware Standard / Software Optional) 69
Restricted Access / Password Option (Model / Option Dependent / Factory 69
Installed)
V. Maintenance
70
System Maintenance Alert Reminders and Resetting 71
Daily 73
Weekly, Monthly 73
Quarterly, Semi-Annual, Yearly 74
Focus Lens Protective Disk Replacement 75
Refilling Cooling Water/Bleeding the Pump (Service Section) --
Changing the Distilled Water Filter (Service Section) --
Splash Protective Window Replacement 75
Filter Replacement, Welding Chamber/Area 76
Digital Messaging Touch Screen Display Cleaning Instructions 77
Fuse Replacement (External & Internal) & Rear Connections (Service Section) --
Yearly Maintenance Chart / Checklist (Appendix) --