LaserStar iWeld 900 Series, Operation & Maintenance Manual

Page: 139 / 172

LaserStar
®
Workstation Operation & Maintenance Manual 900 Series Ver. 991.6 November 2019
139
o
To select a new memory number move J left until memory number is
blinking
o
Move J up or down to select a new memory number
o
Press Store (2X) and parameters will be stored in selected memory
number

Recall
o
Press Recall (1X) “Recall memory XX?
o
Press Recall (1X) (again/immediately) to recall the number in XX
o
To select a new memory number move J left until memory number is
blinking
o
Move Joystick up or down to select a new memory number
o
Press Recall (2X) and parameters will be recalled from the selected
memory number

Special Joystick Action-When in the Store or Recall mode, a right move of the
Joystick will enter the data, exit the mode and update the display with the
previous parameters.

A left motion of the Joystick will exit the store or recall mode

Example on next page
Example
(Joystick)
Action Display
Line
Display Information
Values Currently in Display TL 175V 2.0mS 2Hz 1B 0.5mm*
BL Laser SHTR Closed
III
*
Select new values using “J”
left/right and up/down TL 200V 1.0mS 3Hz 0B 0.2mm*
BL Laser SHTR Closed
III
*
Press “S” (1X) TL 200V 1.0mS 3Hz 0B 0.2mm*
BL Store in memory 24?
III
*
Press “S” (1X) TL 200V 1.0mS 3Hz 0B 0.2mm*
BL Storing to memory**
Display Updates TL 200V 1.0mS 3Hz 0B 0.2mm*
BL Laser SHTR Closed
III
*
Select new values using “J”
left/right and up/down TL 250V 1.5mS 0Hz 0B 0.3mm*
BL Laser SHTR Closed
III
*
Press “S” (1X) TL 250V 1.5mS 0Hz 0B 0.3mm*
BL Store in memory 24?
Move “J” Left (2X) TL 24
III
*
BL 250V 1.5mS 0Hz 0B 0.3mm*
Move “J” Up (24>28) TL 28
III
*
BL 250V 1.5mS 0Hz 0B 0.3mm*
Press “S” (1X) TL
III*
BL Store in memory 28?
Press “S” (1X) TL 250V 1.5mS 0Hz 0B 0.3mm*
BL Storing to memory**
III*
Display Updates TL 250V 1.5mS 0Hz 0B 0.3mm*