LaserStar iWeld 900 Series, Operation & Maintenance Manual

Page: 32 / 172

LaserStar
®
Workstation Operation & Maintenance Manual 900 Series Ver. 991.6 November 2019
32

Have read and understood the chapter concerning safety and the
warnings in this Manual and have confirmed this by their signature;
 
Have been instructed as to the dangerous effects of laser radiation in
accordance with the valid OSHA regulations, ANSI Z136.1-2014 Safe
Use of Lasers about accident prevention for laser radiation or the
equivalent national or international regulations (e.g. IEC 60825-1:2014).

Operating personnel are to receive instruction at regular intervals.
Requirements of Personnel
All those who work with the product must undertake beforehand to:

Comply with the basic regulations on safety at work and accident
prevention for laser radiation, OSHA or

The equivalent national or international regulations (e.g. IEC 60825-
1:2014)

To read the chapter concerning safety and warnings in this Manual
and confirm this by their signature.
Dangers when working with the Product
The LaserStar
®
Workstation is designed according to the state-of-the-art and
meets the approved safety regulations. Nevertheless, its use can still endanger
life and limb (of the user or third parties) or damage the product or other material
assets. The product is only to be used:

For the intended purpose (see the information on proper use) and is in
perfect condition from the point of view of safety.

Malfunctions that may have negative consequences for safety must be
dealt with immediately.
Protective Devices

Whenever the laser product is used, all safety mechanisms have to be
checked for correct mounting and function.

Safety mechanisms may only be removed when the laser device has
been switched “off” and measures have been taken to prevent it from
being restarted.