LaserStar iWeld 900 Series, Operation & Maintenance Manual

Page: 31 / 172

LaserStar
®
Workstation Operation & Maintenance Manual 900 Series Ver. 991.6 November 2019
31
When using solvents or cleaning agents, you must always heed the relevant
warnings. Major fires and explosions can quickly result if such containers are
accidentally exposed to and destroyed by the intense invisible laser beam.
FUNDAMENTAL SAFETY INFORMATION
Information on the Operating Instructions

Knowledge of the safety information and the safety regulations is the
prerequisite for safe and trouble-free operation of this product.

This Manual contains important information on the safe operation of the
product.

All those who work with the product must follow these operating
instructions, especially the safety information.

Moreover, all regulations for accident prevention valid for the current place
of installation must be complied with, especially the OHSA regulations,
ANSI Z136.1-2014, Safe Use of Lasers, on accident prevention for laser
radiation or the equivalent national or international regulations (e.g. IEC
60825-1:2014). There may also be various state, municipalities or local
requirements or regulations.
Organizational Measures
The employer must provide the necessary personal safety equipment (in this
case eye protection is required only for maintenance purposes when there is
direct access to the laser beam).
The requirements of the OSHA regulations, ANSI Z136.1-2014, Safe Use of
Lasers, or the equivalent national or international regulations (e.g. IEC 60825-
1:2014) have to be fulfilled.
Maintain the Laser as instructed in the Operation Manual.
Requirements of the Employer
The employer must ensure not to allow anyone to work with this product unless
they:
 
Are familiar with the basic regulations concerning safety at work and
accident prevention and have been instructed in the use of this product;