LaserStar iWeld 900 Series, Operation & Maintenance Manual

Page: 68 / 172

LaserStar
®
Workstation Operation & Maintenance Manual 900 Series Ver. 991.6 November 2019
68
Figure 15
(Switching Off)
Status Monitoring and Indications
During the self-test, immediately after the device has been switched on, and
during operation, the current status of the laser is indicated by plain text
messages in the Digital Messaging Touch Screen Display. If the indicator is
green in the “OK” button, the system is ready to weld.
In the LaserStar
®
Workstation, the micro controller monitors the conditions for
pulse release on the basis of the following criteria:

If the safety shutter is open, a laser pulse can only be released via the pedal
switch.

In case the safety shutter is closed, the operator cannot release a laser
pulse / lamp flash. (This is to avoid unplanned laser pulse release.)

In principle, the remote interlock prevents a laser pulse release.

A Remote Interlock failure shuts off the flashlamp power supply.
Key
Switch
Mains
Power