LaserStar iWeld 900 Series, Operation & Maintenance Manual, Page: 57 / 172

LaserStar
®
Workstation Operation & Maintenance Manual 900 Series Ver. 991.6 November 2019
57
the parameters & description for the
selected memory location by pressing the
CLEAR button on the screen.
o
ATTENTION: All information in this
memory location will be lost.
(Note: The
parameters & description for factory default
memory locations will also be cleared by this
CLEAR button but can be restored by going
to the Main Screen / Menu / Restore Def
Memory / LST.)
Figure 8b
verifies that the user wants to CLEAR
this memory-“Clear memory 4?”. Pressing CLEAR
again will clear the memory. Pressing HOME will
return to the main screen without clearing this
memory location.
MENU
Pressing this button enters the version / configuration
display screen.
Figure 6
HELP
Press this button to get:

Contact Information

Model Number

Serial Number

Tools / information to aid the user
HOME
Pressing this button returns system to the main screen-
Figure 5
RECALL
Press the recall button twice after the memory location
has been selected. (Note: The second button activation
is in response to a question “Recall memory XX ?” The
memory location description will change from gray to
yellow in color when the weld parameters are from the
memory location number.)
Figure 11 & 12
(DOWN/DN)
Pressing this button will decrease the selected weld
parameter values/shape; reduces memory location
number; and selects Menu function (>).
(UP)
Pressing this button will increase the selected weld
parameter values/shape; increases memory location
number; and selects Menu function (>).
ABC
Pressing this button will enter the Alpha / Numeric
keypad display. This display is used to add description
of weld operation in the selected memory location.
Figure 9 & 10
SAVE
Pressing this button twice will store the displayed weld
parameters into memory location number displayed in
the upper left corner. (Note: The second button
activation is in response to a question “Store in memory
XX ?”)
Figure 13 & 14
Version/Configuration Screen
(Figure 6)
Menu Display Screen
Press the
UP
or
DOWN
arrow to move the cursor (>) to
the selected item. Press “
ENTER
” to enter the mode.
Use the
UP
or
DOWN
arrow to change the mode (i.e.-