![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672093.webp)
93
Behavior Search
Use behavior search to search for recordings triggered by
detected behaviors including cross line and intrusion.
1.
Click
VCA > VCA Search > Behavior.
2.
Select camera(s), set a search period, select a search type,
and then click
Search
. Search results are displayed.
3.
View search results in a chart or table. Back up search results
(including images and recordings) as needed. To view videos
recorded when the behavior was detected (around 10
seconds before and after), click the play button.
People Counting
Use people counting to count people entering and/or leaving an
area during a specified period (day, week or year).
1.
Click
VCA > VCA Search > Counting.
2.
Select the camera, counting type (people entered or left),
report type (daily, weekly, monthly or yearly), set a time
period, and then click
Count
. Search results are displayed.
You may choose to display search results in a chart or table.
When you click a bar, statistics of the selected camera(s) are
displayed
3.
(Optional) To save the counting statistics to a connected USB
storage device, click
Backup
.
Heat Map
Heat map is used to monitor passenger flow in specified area and
to display the data in the form of an image by using warm-to-cool
color spectrums. The warmer the color, the higher the density of
the passenger flow.
1.
Click
VCA > VCA Search > Heat Map.
2.
Select the camera and the report type, then click
Count
.