![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672017.webp)
17
2
Initial Configuration
Preparation
Make sure that at least one monitor is correctly connected
to the VGA or HDMI interface on the rear panel of the NVR.
Verify that the hard disk(s) are correctly installed. For
detailed steps to install a hard disk, please refer to the quick
guide shipped with your NVR.
Device Login
The login page appears after the NVR starts up.
1.
Enter the default
admin
password
123456
, click
Login
, and
then click
Yes
to change the password.