Larson Electronics NVR-NDAA-POE-4CH, Instruction Manual, Page: 103 / 157

103
2. Use the default database ID and port. Click to set camera
ID.
3. Click OK .
4. Log in to the camera's Web interface and complete settings
on
Setup > Config Management > Photo Server. The settings
may vary depending on the platform communication type
you choose. Some settings are described below.

TMS Server : IP address of the NVR

TMS Server Port : Database port configured on the NVR.

Platform Communication Type
: Choose the correct
type.

LPR ID : Database ID configured on the NVR.

Device ID : Camera ID configured on the NVR.

Platform Access Code : Use the default setting.

Username : Use the default setting.