![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672107.webp)
107
2.
Select
Enable Video&Image Database Server
, and complete
the settings.
Note:
The server address, port number, username and password
should be consistent with those configured on the platform.
Advanced Configuration
PPPoE
The NVR allows access through Point-to-Point over Ethernet
(PPPoE).
1.
Click
Network > Advanced > PPPoE.
2.
Enable PPPoE by selecting the check box.
3.
Enter the username and password provided by your Internet
Service Provider (ISP). Network information including IP
address appears when dial-up succeeds.
NOTE!
If your NVR has multiple NICs, PPPoE dial-up will be implemented
through the NIC specified as the default route.
4.
Click
Apply
to save the settings.