![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672124.webp)
124
NOTE!
The name entered should be unique.
The start identifier, end identifier, and line delimiter should
be hexadecimal characters. The ignore characters are
character strings that cannot be displayed.
The source address is the IP address of the POS machine, and
the destination address is that of a settlement center that
receives POS data. An empty destination address means it is
necessary for the NVR to forward POS data.
3.
Set POS OSD under
System > POS > POS OSD,
including the
position, font and color of POS information displayed on
the screen.
Serial Port Configuration
Only certain NVR models support this function.
Serial port settings in the NVR should be consistent with those in
the connected serial device. Serial port configuration is required
for PTZ control.
1.
Click
System > Serial.
2.
Configure the parameters for the serial port.
NOTE!
You may set
Port Usage
to
Keyboard
to control a PTZ camera with
a specialized surveillance keyboard.
3.
Click
Apply
to save the settings.
User Configuration
Add, delete users or edit user permissions. Only administrative
users can perform these operations. Device password is required
for user configuration.