![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672029.webp)
29
NOTE!
For a Digital Video Server (DVS), a window appears when you click
Add
, and you need to select channels to add the connected
cameras.
Option 2
This option is not applicable to NVRs with PoE ports or switching
ports.
1.
Click in a window.
2.
Select the desired IP device and then click
Add
.
Option 3
This option is only applicable to NVRs with PoE ports or switching
ports. Connect an IP camera to a PoE port or a switching port with
a network cable. The connected camera will be added to the NVR
automatically. Check status under
Camera > Camera > Camera.
means live video from the camera is available. Click to view
live video.
If the camera is connected via a network switch, click under
Cam Config
in the window displayed, set
Add Mode
to
Manual
and then complete the settings correctly.
NOTE!
appears under
Status
if the power output from a PoE port is
below or above the rated power of the connected camera.
Option 4
Use this option to add an IP device that is connected to a different
router, for example, when the NVR and the IP device are
connected across the Internet.