![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672122.webp)
122
Time Configuration
Time
1.
Click
System > Time > Time.
2.
Select the correct time zone, and then set date and time
formats and the system time. See the example below.
3.
To use Network Time Protocol (NTP), enable auto update, set
the address and port number of the NTP server, and the
update interval.
4.
Click
Apply
to save the settings.
DST
1.
Click
System > Time > DST.
2.
Enable DST by selecting the check box, and then set the start
time, end time, and DST bias correctly.
3.
Click
Apply
to save the settings.
Time Synchronization
Use this function to synchronize camera time with the NVR. Time
sync is enabled by default, and cameras will synchronize time
with the NVR after getting online, and then synchronize once
every 30 minutes.