![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672153.webp)
NVR-NDAA-POE-4CH
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
53
of
1
57
Thank you for purchasing our product. Contact your local dealer if you have any questions or feedback. No part of this manual may be copied,
reproduced, translated, or distributed in any form or by any means without prior consent in writing from our company. Contents of this manual are subject
to change without prior notice. No statement, information, or recommendation in this manual shall constitute formal guarantee of any kind, expressed or
implied.
0
Safety Information
Read through the instructions carefully before starting installation and operation.
, Installation and maintenance must be performed by qualified personnel.
, This device is a class A product and may cause radio interference. Take measures if
necessary.
, Disconnect power before installation �nd cable connection. Wear antistatic glovesduring installation. Use the manufacturer recommended battery. Improper use
or replacement of the battery may cause risk of explosion. Dispose of the used battery according to local regulations or the battery manufacturer's instructions.
Never dispose of the battery in fire.
, The device is intended for indoor use only. Ensure a proper operating environment, including temperature, humidity, ventilation, power supply, and lightning
protection. The device must always be properly grounded. Keep the device from dust, excessive vibration, liquid of any kind, and strong electromagnetic radiation. Do
not stack devices.A sudden power failure may cause device damage or loss of data.
, Take necessary measures to ensure data security and protect from network attack and hacking (when connected to Internet).
0
Regulatory Compliance
FCC statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
LVD/EMC Directive
( €
,
This product complies with the European Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU.
WEEE Directive-2012/19/EU
�
-
The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of in a responsible
manner.
Battery Directive-2013/56/EC
Battery in the product complies with the European Battery Directive 2013/56/EC.For proper recycling,return the battery to your supplier or to a
designated collection point.
0
Default IP, Username and Password
• Default IP address:
192.168.1.30
•
Default admin username:
admin
•
Default admin password:
123456
(intended only for first-time login and should be changed to a strong one with at least 8 characters including upper and lower
case letters, digits and symbols for security)
0
Disk Installation
Caution:
Disconnect power before installation. Use antistatic gloves or wristband throughout installation.
The screw holes are for different uses:
• A: For 3.5" HDD with 4 screw holes.
A and B: For 3.5" HDD with 6 screw
holes.
• C: For 2.5" HDD.
;-
A1=
;=
=
I
I
I
..
,
,
"
=
d\l
-§j=
I,
=:i�
I
�
I
-..
v
II
=
=
=
=
!
I
0
-
A3:;:
941
= =
= -= =
I'
I
'.
'.
'.
I
=·
=
J
.
Al~A4:
For 3.5" HDD with 4 screw
holes.
.,
.
Al~A6:
For 3.5" HDD with 6 screw
holes.
.
Note:
The three dotted lines (for
illustration) divide four sets of screw
holes. Do not install across the lines.
• An 8 HDD device has two mounting
plates. Take out the mounting
plates, secure all disks on the
mounting plates, and then fix the
mounting plates in the device .