manualshive.com logo in svg

Larsen & Toubro Star 55, Operating Manual

Share
Download
Larsen & Toubro Star 55 Operating Manual Download Page 80

Star 55

When NIBP is selected in the main screen, NIBP Setup window will pop-up on the

screen as shown in Figure 4.8.

NIBP

Mode

:

Select this to choose Manual, Stat or Auto mode from

drop down list.

Manual

:

For taking individual BP readings. After selecting this function,

press start NIBP measurement key on front panel to begin manual

NIBP measurement. To abort NIBP measurement midway, press

the same key again.

Auto

:

For taking BP readings automatically at set intervals (Timer

set). Press START on the front panel to take the first reading.

Next NIBP reading starts after the set time interval. The time

left before the next measurement to begin is displayed on screen.

This displayed time is decremented every minute. Timer can

be set only if Automatic is selected.

Stat

:

Allows the user to take as many readings of NIBP as possible in

5 minutes of continuous operation.

Alarm

:

Select this to enable (switch ON) or disable (switch OFF) the

NIBP alarm.

Sys High Limit

:

Select this to set upper alarm limit for Systolic alarm from Numeric

keypad ( To use this function, ensure that alarm is enabled).

Figure 4.8

4.7

Summary of Contents for Star 55









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands