manualshive.com logo in svg

Larsen & Toubro Star 55, Operating Manual

Share
Download
Larsen & Toubro Star 55 Operating Manual Download Page 77

Note

The last set gain level is saved in memory. This setting will remain even when

the unit is switched OFF.

(When sourced from ECG cable)

RESP

When RESP is selected in the Main screen, Resp setup window will pop-up on the

screen as shown in Figure 4.5.

Figure 4.5

Alarm

:

Select this to enable / disable the alarm from the drop down list.

High Limit

:

Select this to set upper alarm limits for Respiration Rate from

Numeric keypad (To use this function, ensure that alarm is

enabled).

Low Limit

:

Select this to set lower alarm limits for Respiration Rate from

Numeric keypad (To use this function, ensure that alarm is enabled).

Gain

:

Select this to change the height of the respiration waveform in

scales of X1, X2, X3, X4 and Auto.

X1 will provide lowest amplitude and X4 will have maximum

amplitude.

Default setting for Respiration gain is X4.

RR Source

:

Select this to choose the source for Respiration rate between

RA-LA

 

and RA-LL.

No Breath

:

Select this to choose time limit for breath detection.

Exit

:

Select this to exit from RESP Setup window.

4.4

Summary of Contents for Star 55









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands