manualshive.com logo in svg

Larsen & Toubro Star 55, Operating Manual

Share
Download
Larsen & Toubro Star 55 Operating Manual Download Page 115

Star 55

Routine Maintenance

L&T products have been designed to operate continuously with minimum

maintenance.

However, in order to ensure better performance and safety, the routine maintenance

should be performed. A summarized schedule and full details of maintenance is

covered in this section.

Following action should be carried out in routine maintenance. Aestrix (

*

) indicate

that the following action is required.

Action

General

 ECG, RESP, SpO

2

       TEMP, NIBP, IBP, CO

2

A

B

1.Check patient connections and

*

accessories

2.Cleaning and sterilization

*

of accessories

3.Clean monitor exterior

*

4.Check power cord

*

5.Check battery

*

6.Check monitor operation

*

*

7.Check monitor calibration

*

Caution

Maintenance involving removal of the outer case or access covers must not be

attempted by the operator, but referred to a qualified L&T medical's representative.

6.1

Summary of Contents for Star 55









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands